POE Splitter Power supply module 12-48v separator combiner
Please subscribe for more useful videos about FREE Internet and WiFi Marketing http://goo.gl/uBXhYY --~-- If you have problem getting power cable to your router, donot worry, you can use POE Adapter cable to inject power to RJ-45 cable So your WiFi router can be powered and connect to the Internet with only 1 RJ-45 cable My router is now powered and connected And here are POE Splitter Power supply modules 12-48v separator combiner The Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet The devices can be supplied standardly up to 50V Passive PoE`s range is normally form 30-40 metres/100-130 ft The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device). Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection. Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 - 1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket. 2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end. 3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them. Input / Output Specifications DC Input Voltage 48V ± 5 % DC Output Voltage 48V ± 5 % Max Output Current 0.4A Max. Over Current Protection None General Sepcifications: Operating Temperature 0oC ~ +45oC Storage Temperature -30oC ~ +70oC CASE OF MATERIAL PVC Ethernet Date Rate 10/100Mbps Ethernet Cable TIA/EIA 568 Cat.5 Humidity Up to 90% Weight: 70g DC Plugs 2.1mmx5.5mmx12mm Length 185mm Please subscribe and find how to do #WiFiMarketing DIY Wi-Fi router long range antenna, RAM, flash and turn on social WiFi marketing with OpenWrt captive portal to boost your business using wireless LAN High gain 9 dBi dual band wifi antenna VS original TP-LINK routers https://www.youtube.com/watch?v=yqtpkVea1_M WiFi antenna hack 5dBi to 16dBi long range outdoor TP-Link router https://www.youtube.com/watch?v=ytgQW49P0GE Display wirelessly to TV using AnyCast M2 Plus Mini Wi-Fi Display Dongle Receiver https://www.youtube.com/watch?v=gCr1tEWREk8 Out door long range WiFi router mod Tp-Link TL-WR841N hack lightning protection https://www.youtube.com/watch?v=wSAyS8WCIZY Copy eprom flash chip to chip without computer ezp2010 copy tools https://www.youtube.com/watch?v=UZsbB7E0YjE #WiFiRouter #AntennaWiFi #DIYWiFi #OpenWRT #WirelessLAN
Please subscribe for more useful videos about FREE Internet and WiFi Marketing http://goo.gl/uBXhYY --~-- If you have problem getting power cable to your router, donot worry, you can use POE Adapter cable to inject power to RJ-45 cable So your WiFi router can be powered and connect to the Internet with only 1 RJ-45 cable My router is now powered and connected And here are POE Splitter Power supply modules 12-48v separator combiner The Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet The devices can be supplied standardly up to 50V Passive PoE`s range is normally form 30-40 metres/100-130 ft The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Airlive, Senao, Wline, Micronet, Edimax etc. The devices can be supplied standardly up to 50V. (The power adapter is not included - it is possible to use the power adapter of the powered device as access point, IP camera etc.) Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device). Contains: INJECTOR and SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection. Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 - 1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket. 2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end. 3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them. Input / Output Specifications DC Input Voltage 48V ± 5 % DC Output Voltage 48V ± 5 % Max Output Current 0.4A Max. Over Current Protection None General Sepcifications: Operating Temperature 0oC ~ +45oC Storage Temperature -30oC ~ +70oC CASE OF MATERIAL PVC Ethernet Date Rate 10/100Mbps Ethernet Cable TIA/EIA 568 Cat.5 Humidity Up to 90% Weight: 70g DC Plugs 2.1mmx5.5mmx12mm Length 185mm Please subscribe and find how to do #WiFiMarketing DIY Wi-Fi router long range antenna, RAM, flash and turn on social WiFi marketing with OpenWrt captive portal to boost your business using wireless LAN High gain 9 dBi dual band wifi antenna VS original TP-LINK routers https://www.youtube.com/watch?v=yqtpkVea1_M WiFi antenna hack 5dBi to 16dBi long range outdoor TP-Link router https://www.youtube.com/watch?v=ytgQW49P0GE Display wirelessly to TV using AnyCast M2 Plus Mini Wi-Fi Display Dongle Receiver https://www.youtube.com/watch?v=gCr1tEWREk8 Out door long range WiFi router mod Tp-Link TL-WR841N hack lightning protection https://www.youtube.com/watch?v=wSAyS8WCIZY Copy eprom flash chip to chip without computer ezp2010 copy tools https://www.youtube.com/watch?v=UZsbB7E0YjE #WiFiRouter #AntennaWiFi #DIYWiFi #OpenWRT #WirelessLAN