Using Holding Pattern the HobbyZone Champ S+ RTF and BNF
Please click "Show More" for links and more information. Please visit http://bit.ly/1Ugeusx for more information on the HobbyZone Champ S+ RTF and BNF. Holding Pattern uses GPS sensors and an altimeter to generate a circular flight path near the take-off point at an altitude of approximately 120ft above the ground. The pilot can activate Holding Pattern by momentarily pressing the BIND button. When Holding Pattern is activated, the airplane will autonomously fly back to this circular flight path and continue circling until the command is cancelled. The command can be cancelled by the pilot at any time after activation by momentarily pressing the BIND button or by switching modes. Horizon Hobby is on Facebook! Visit us at http://www.facebook.com/pages/Horizon-Hobby/55340718934 Come +1 us on Google+! Head on over to https://plus.google.com/+horizonhobby Follow HorizonHobby.com on Twitter at http://twitter.com/Horizon_Hobby
Please click "Show More" for links and more information. Please visit http://bit.ly/1Ugeusx for more information on the HobbyZone Champ S+ RTF and BNF. Holding Pattern uses GPS sensors and an altimeter to generate a circular flight path near the take-off point at an altitude of approximately 120ft above the ground. The pilot can activate Holding Pattern by momentarily pressing the BIND button. When Holding Pattern is activated, the airplane will autonomously fly back to this circular flight path and continue circling until the command is cancelled. The command can be cancelled by the pilot at any time after activation by momentarily pressing the BIND button or by switching modes. Horizon Hobby is on Facebook! Visit us at http://www.facebook.com/pages/Horizon-Hobby/55340718934 Come +1 us on Google+! Head on over to https://plus.google.com/+horizonhobby Follow HorizonHobby.com on Twitter at http://twitter.com/Horizon_Hobby