How To Assemble ODROID-GO Advance
ODROID-GO Advance is to play 16-bit or 32-bit retro games on a handheld device with more advanced features and capabilities than ODROID-GO. Available from end of January 2020. https://wiki.odroid.com/odroid_go_advance/start https://forum.odroid.com/viewtopic.php?f=187&t=37202 https://www.hardkernel.com/shop/odroid-go-advance/ Processor: CPU: RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz), GPU: Mali-G31 MP2 Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width) Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface) Display: 3.5inch 320×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface) Audio: Earphone stereo jack, Speaker 0.5Watt 8Ω mono Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time DC Jack: 5V input: 2.5mm diameter DC plug: USB charging cable is included in the package. External I/O: USB 2.0 Host x 1, 10Pin IO port(I2C, GPIO, IRQ at 3.3Volt) Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog Joystick Power consumption: game emulation: 200~300mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA At this moment, the trial BSP image supports the following systems. * atari2600 * atari5200 * atari7800 * atarilynx * gamegear * gb * gba * gbc * mastersystem * megadrive * nes * pcengine * pcenginecd * psx * segacd * snes * psp
ODROID-GO Advance is to play 16-bit or 32-bit retro games on a handheld device with more advanced features and capabilities than ODROID-GO. Available from end of January 2020. https://wiki.odroid.com/odroid_go_advance/start https://forum.odroid.com/viewtopic.php?f=187&t=37202 https://www.hardkernel.com/shop/odroid-go-advance/ Processor: CPU: RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz), GPU: Mali-G31 MP2 Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width) Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface) Display: 3.5inch 320×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface) Audio: Earphone stereo jack, Speaker 0.5Watt 8Ω mono Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time DC Jack: 5V input: 2.5mm diameter DC plug: USB charging cable is included in the package. External I/O: USB 2.0 Host x 1, 10Pin IO port(I2C, GPIO, IRQ at 3.3Volt) Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog Joystick Power consumption: game emulation: 200~300mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA At this moment, the trial BSP image supports the following systems. * atari2600 * atari5200 * atari7800 * atarilynx * gamegear * gb * gba * gbc * mastersystem * megadrive * nes * pcengine * pcenginecd * psx * segacd * snes * psp